What should be paid attention to during the trial run of the mixer

Release time:

2023-10-13

The mixer is a kind of machine with a pair of specific shape and relatively rotating rotors, and it can stop plasticizing and mixing the polymer materials in a closed state in a closed state with adjustable temperature and pressure. It is mainly composed of the mixer and rotor. , Rotor seal installation, feeding and pressing installation, unloading installation, transmission installation and machine base.

1. During the trial run of the mixer, the speed should be stopped from low to high speed.
2. During the trial run of the mixer, the amount of glue is gradually increased from 50% and 75% of the working volume to full load.
3. The internal mixer should have a dry run for 10-15 minutes at the same time, and the load can be stopped for trial operation.
4. During the trial operation of the mixer mixer load, there should be no glue leakage or powder leakage at the end face seal.
5. The discharge door of the mixer should be well sealed during load trial operation without leakage.
Pay attention to the above 5 points during the trial run of the mixer and it can work well, which improves both efficiency and quality.

Latest News

Happy summer 10th season: rubber machinery Deyu good

2024-04-28

2023 Annual Meeting

2024-04-26

Happy summer season 9: Deyu because of my change to build a strong quality enterprise

2024-04-26

Matters needing attention when putting vulcanizing agent in open mill

2023-10-13

What should be paid attention to during the trial run of the mixer

2023-10-13

Purpose, structure and working principle of open mill